22
Feature
The parameters of the stroboscopic mode can be adjusted to better fit individual
needs. In stroboscopic mode, the display shows the manual power level set up,
the number of set lamps and the set time.
Select the setup menu with the main switch (1) SET. Here you can individually select
the levels of the stroboscopic mode. Activate the corresponding menu item with the
push button (3), select the level with the rotary button (2) and save the settings with
the push button (3).
Strobo Lamp Nr
02 … 15
This set the number of lamps the strobe will deliver on one picture. The number can
be set up from 2 to 15.
Strobo Time
Auto / 0,1 … 3,0s
This setting defines the duration of the stroboscopic lamps sequence. If set to AUTO,
the flash will read and use the shutter speed time set on camera and will automatically
divide this time by the number of stroboscopic lamps to achieve an equal time space
between them. If manual time is set, the flash will divide the set time by the number of
stroboscopic lamps to achieve an equal time space between them within the desired
time. Adjustments are possible from 0,1s to 3,0s in steps of 0,1s.
Strobo Mode
No Mark / Mark First / Mark Last / Mark F-L
In the stroboscopic sequence, it is possible to have all the lamps of the sequence
with the same energy or it is possible to increase the energy of the first lamp, the last
Shooting Mode – Cable
