Maintenance and transport
4
At the end of every dive (sea, lake, pool), al-
ways rinse with fresh water and dry.
4
It is advisable to have the product inspec-
ted annually by an authorized SEAC SUB
center.
4
In case of prolonged disuse, we advise re-
placing the old batteries. If the torch will
most likely not be used for a period of mo-
re than 30 days, it is advisable to remove
the batteries from the battery casing.
4
Never insert batteries that present defor-
mations to the casing or loss of liquid.
4
If water should enter the torch, it is advisa-
ble to open it and rinse the inside immedia-
tely with fresh water, taking care to first re-
move the batteries from the battery casing.
Dry immediately with a cloth or with a
hairdryer on a warm setting, paying parti-
cular attention to parts with electrical con-
tacts.
Remove eventual rust from metal parts and
proceed with the insertion of new batteries
to check proper functioning.
4
If a large quantity of water entered the
torch or if it remained inside for a long time,
it is advisable to open the torch and imme-
diately rinse the inside with fresh water. In
this case we suggest you immediately con-
sult a competent repair center or the nea-
rest SEACSUB store.
4
Always transport the torch inside a bag that
protects it from eventual impact.
4
During transport or disuse, the ring switch
must be left in the blocking position. In or-
der to block the switch knob, you must ac-
tivate the blocking button on the knob itself
(drawing 14).
Drawing 14 - Insertion of the switch-on locking button
in the ON position.
Certificate of Warranty
SEACSUB S.p.A. guarantees the correct func-
tioning of the product to which this document
is attached.
This guarantee has a duration of two (2) years
in accordance with current European regula-
tions.
The warranty herein can be enacted according
to the conditions and limits expressly indicated
below:
1. The warranty will have a duration of 2 (two)
years, beginning from the moment the
product is acquired from an authorized
SEACSUB dealer and does not require any
preventive formality or subsequent valida-
tion.
2. This warranty is valid only for the first pur-
chaser of the product from an authorized
SEACSUB dealer.
Being a strictly nominative warranty, it is
not transferable to third parties unless pre-
viously and explicitly authorized by SEAC-
SUB.
3. This warranty covers all and any functional
defects caused by:
• Intrinsic defects caused by the use of
materials believed to be unsuitable
• Evident errors in the design, manufactur-
ing, or assembling of the product or it
components
ENGLISH
19
Replace the switch-on knob (drawing 10) and
turn it to check correct functioning (drawing 11).
Drawing 10 - Correct insertion of the switch-on knob
Drawing 11 - Checking the functioning of the switch-on
knob
Drawing 12 - Insertion of the battery casing into the
torch casing.
Then carefully reposition the torch casing to be
screwed together (drawing 12). Carefully screw
the casing into place clockwise until firmly
locked (drawing 13).
Drawing 13 - Closure of the torch by screwing
clockwise
ENGLISH
18
