Description of functions
This function calls up the dive profile and displays the current profile data. Profile data is
recorded at 1 minute intervals and the profile data capacity is about 30 hours.
CAUTION !!
The following restrictions apply to log data and profile data.
Address -------------------------------------------------> Maximum memory: 30 hours
0
1 2 3 4 5 6 7 8 9 10 etc.
When the log capacity is exceeded
Address -------------------------------------------------> Maximum memory: 30 hours
0
1 2 3 4 5 6 (7)
*1 *2
In the second example above, if the seventh log entry
exceeds the 30 - hour
log capacity,
the profile returns to address 0 and begins overwriting the previous log data.
This means that the old data for log entry 1 is erased by the part of log entry 7 that exceeds
the log capacity and fills addresses as far as "*1" in this example.
The oldest log data is now in log entry 2, and there are only six log entries instead of seven.
If log entry 7 fills addresses as far as "*2" in this example, both log entries 1 and 2 are erased
by log entry 7, the oldest log data is now in log entry 3, and there are only 5 log entries.
19
Summary of Contents for AQUALAB
Page 17: ...Decompression stop violation warning Ascent rate warning Maximum depth warning 16 ...
Page 18: ...Oxygen toxicity exposure level warning Out of measurement range warning 17 ...
Page 22: ...Dive Mode No decompression mode Decompression mode While switch A is pressed 21 ...
Page 38: ...37 ...
