Page 10 of 17
3.
Use a level to check that the unit is level side
to side.
4.
Check that air conditioner cabinet is tilted to
the outside so that water will run to the
outside.
5.
Reuse the insulation to seal opening
between cabinet and frame.
6.
Use existing holes in sides and top of
cabinet and 7 #10 x 1” wood screws (not
provided) to attach cabinet to frame.
NOTE:
Do not over-tighten screws or
cabinet will distort and provide a poor seal
between cabinet and air conditioner.
7.
Caulk all outside wall openings around
cabinet.
Complete Installation
1.
Insert seal behind the top of the lower
window sash and against the glass of the
upper window.
2.
Place one window-lock bracket on top of
lower window and against upper window
sash on each side of window.
3.
Use a 3/32” drill bit to drill starter holes
through the holes in each bracket into the
window sash.
4.
Attach both window-lock brackets to window
sash with a #10 x ¾” round-head screw to
secure window in place.
Final Installation
NOTE:
5. Make sure the free end of the ground wire
is outside of the cabinet.
6. Insert air conditioner into cabinet.
7. Connect green ground wire to cabinet
base with ground screw. Position ground
wire pointing straight up. Put excess
ground wire between coil and air
conditioner cabinet.
8. Push Front panel straight on and then
lower it slightly to lock it into place.
9. Using 2 # 10 x 3/8” round head screws,
attach bottom of front panel.
