Page 6 of 17
________________________________________________________________________________________
Window Installation (on some models)
NOTES:
•
Handle air conditioner gently.
•
Be sure your air conditioner cabinet does
not fall out of the opening during
installation or removal.
•
The place where the power cord exits the
air conditioner should be no more than 4 ft
(122 cm) from a grounded 3 prong outlet.
•
Do not block the louvers on the front panel.
•
Do not block the louvers on the outside of
the air conditioner.
Attach Top Channel
NOTE:
Attach top channel and side curtains to
air conditioner cabinet before placing cabinet
in window.
•
Locate provided bag of screws.
•
Place top channel on top of air conditioner
cabinet, lining up the 4 holes in top
channel with the 4 holes on top of air
conditioner cabinet.
•
Using 4 - #10 x 3/8” washer-head Phillips
thread cutting screws, attach top channel
to air conditioner cabinet.
Attach Side Curtains
•
Locate provided bag of screws.
•
Insert top and then bottom of right-hand
curtain housing in top and bottom curtain
channels on air conditioner.
•
Extend right-hand curtain outward so you
may insert the first screw through the
middle hole of the curtain. Using #10 x ¼”
pan-head Philips screw, screw curtain to
middle hole in air conditioner cabinet.
NOTE:
This screw is required to correctly
attach curtain (top to bottom) to the air
conditioner cabinet.
•
While the right-hand curtain is still
extended, insert #10 x ¼” pan-head
Phillips screws into the top and bottom
slots of curtain. Screw curtain to the top
and bottom holes in the air conditioner
cabinet.
•
Slide the curtain housing into the curtain
channels as far as it will go.
•
Repeat above steps for the left hand
curtain.
Attach foam adhesive seal
Attach foam adhesive seal along the bottom of
the curtain bottom channel.
