SEA LEPUS BOX 120V/24V, Manual

Page: 7 / 20

7
V (±5%) 50/60 Hz 120
120V
24V
360 W 100W
3,1 A
6 A
21 Nm 0 - 45 Nm
13 In/s 14 In/s
90%
integrated /
1200 Lb 1750 Lb
40 ft
electromechanical
from -4°F to 131°F
95 Lb
IP 55
IV
1. FEATURES AND SPECIFICATIONS
LEPUS BOX is an electro-mechanical reduction operator. The LEPUS BOX can be supplied with either
mechanical clutch or electronic sensing device as methods of limiting the motor torque. The gates open &
close stop limits are accurately stored by mechanically triggering the on-board micro-switch. Manual release
is quickly achieved by operating a key manual release system.The control unit allows to choose between
automatic or semi-automatic control logic and will provide all normal safety logic functions
2. GENERAL SWITCH
Into LEPUS BOX you can find a general switch (Fig. 13) which allows to turn on or off the electric power supply
CAUTION: Operator must be started only after having correctly installed and adjusted all components
WARNING! It is mandatory to switch off the power supply by putting switch to « OFF » when you need to work
on the operator (eg. repairs, power loss, components installation)
Into LEPUS BOX you can also find two useful power sockets (Fig. 13) which allow to connect work tools or
accessories for a maximum total load of 15A
COMPONENTS
DIMENSIONS
TECHNICAL FEATURES
Power supply
Motor power supply
Power
Absorbed current
Thrust force
Leaf speed (pinion Z26)
Use rate
Thermal protection
Max gate weight
Max gate opening
Type of limit switch
Operating temperatures
Operator weight
Protection class
Classification LEPUS BOX 120V LEPUS BOX 24V
1 Release
2 Magnetic encoder
3 Limit switch
4 Foundation plate
5 Control unit
6 Magnetic loops
7 General Switch
and sockets
NOTE: The frequency of use is valid only for the first
hour at 68° F room temperature
Fig. 13
Fig. 14
21”
14”
13”
1
2
3
4
5
6
7
Fig. 12
7
ON - OFF
switch
Sockets
Max
load
15A