manualshive.com logo in svg

SEA 7157, Operator'S Manual, Page: 44 / 49

Share
Download
SEA 7157 Operator'S Manual Download Page 44

REAR PANEL

39

REAR PANEL CONNECTIONS

POWER CONNECTOR

:

Connect to a power supply that delivers 12 or 24 volts DC and is capable of 6 or
3 Amps respectively current.

RF CONNECTORS

:

Two UHF female connectors are used for interconnecting the necessary 50 ohm
coax cables to the antenna systems.  Coax type should be RG-58C/U, RG-213/U
or equivalent using a PL-259 UHF plug.  The connector labeled ANTENNA 50
OHMS is for normal radio operations and DSC transmissions.  The second
connector is for the dedicated channel 70 receiver.

PRINTER - P1

:

Interconnect for connecting an optional parallel printer is provided for printing
received messages and display screens.  Pressing the SQL key will send the
screen information to the printer.

NMEA 0183 - P2

:

The P2 connector allows NMEA 0183 navigational input from a GPS or Loran
receiver using pins 1 and 2.  The input NMEA 0183 signal is buffered and
output on pins 3 and 4 for driving additional equipment.

ACCESSORY - P3

:

Use for interconnecting additional equipment requiring accesses to the radio
transmit, receive and alarm circuitry.

GND

-

(Pins 1 and 8)  Provides access to the negative side (ground) of the

primary supply.

MIC

-

(Pin 2)  Auxiliary input for a dynamic microphone.

PTT

-

(Pin 3)  Applying a ground potential to this connection activates the

transmitter.

HS AUDIO

- (Pin 4)  Handset receiver audio.  600 ohms.

INT SPKR

- (Pin 5)  Internal speaker input.  A jumper to the AF OUT terminal

is required to operate the internal speaker.

AF OUT

-

(Pin 6)  AC coupled output of the audio power amplifier.  Speaker

impedance required is 3.2 ohms or greater.  Connect to INT SPKR for audio.

MUTE

- (Pin 7)  Supplying a ground to this pin will mute the receiver.  During

transmit, this connection will supply a ground for muting another receiver.

ALRM RQ IN

- (Pin 9)  Input signal for requesting a Distress signal from a

remote alarm station.  Grounding this line will initiate a Distress call.

ALRM ACK OUT

- (Pin 10)  This output terminal provides an Alarm

Acknowledgment signal when used with a remote alarm station.

Summary of Contents for 7157


















































Reviews:

No comments