Sea Tel 9711-92, Installation And Operation Manual

Page: 99 / 196

Changing Satellites - DAC-2202 Ver 6.08g With a 9711 TXRX Antenna System
Basic button pushing in any one of the sub-menus is; Use the LEFT and RIGHT arrow keys to bring up, and move, the cursor
to select a character. Use the UP or DOWN arrow keys to increment or decrement the selected character to the desired value.
Status
SEA TEL INC – REMOTE
9711 VER 2.03
Skew 0000 AGC 1234
LAT 38 N LON 122 W
HDG 000.0 000.0
Ship Menu
Set to the known Polarization skew (in whole degrees) for
the satellite currently being, or intended to be, tracked.
Values less than 0000 will be displayed as a negative
value.
SAT 180.0 W
Set to the desired Satellite Longitude and Hemisphere.
The desired satellite is
now being targeted.
Verify that LAT, LON & HDG are correct.
REFLECT A AGC 1234
Antenna Menu
AZ 123.4 EL 056.7
REL 234.5 AGC 1234
Status
SEA TEL INC – REMOTE
9711 VER 2.03
Brings up the cursor.
CONTROL
TRACKING On Lin P
Toggle through the list of possible BAND selections:
Brings up the cursor.
Toggle Reflector selection:
Assure that Reflector A for C-Band is selected.
SAT 101 W THRS 1234
MHZ 1100 NID 1234
MHZ 1100 AGC 1234
KHz 250 AGC 1234
Satellite Menu
Set to the desired MHz frequency that you want to use for
Tracking.
Set to the desired KHz frequency that you want to use for
Tracking.
Press ENTER 5 times
Press and Hold the Left & Right arrows
until “AUTO TRIM” is displayed
Press UP arrow 3 times
Set to desired Transmit polarity. Select:
1 for LHCP TX
2 for Horizontal TX
3 for RHCP TX
4 for Vertical TX
SETUP
TX Polarity 0002
Press ENTER 3 times
Press ENTER 4 times
Press NEXT 2 times
Quick Press and release the Left & Right
arrows until “SAVE NEW PARAMETERS”
is displayed
Press ENTER 2 times
Press ENTER 3 times
Press NEXT 2 times
Press NEXT 2 times