background image

52 Sundancer

®

 

(525 Sundancer

®

)

I

Congratulations on becoming the new owner of the world’s
most prestigious boat. We at Sea Ray

®

 Boats, Inc.

welcome you into our worldwide and ever-expanding
family of  boating enthusiasts.

The Owner’s Manual Packet, to be kept on board your
Sea Ray, gives  you important information on all the
features of your Sea Ray, for years of trouble-free boating
take the time to carefully review the information in your
Owner’s Manual Packet and really get to know your boat.

Have everyone who will operate your boat read this
manual.

The Owner’s Manual Packet contains the following:

Owner’s Manual

:  The Owner’s Manual gives you

important operating and safety information, as well
as reminding you about your responsibilities as a
boat owner/operator.

Original Equipment Manufacturer (OEM)
Information:  

This section of your Owner’s Manual

Packet contains information from the manufacturers
of equipment installed on your boat. Examples
include the engine, engine control and steering
system. Throughout the Owner’s Manual you will be
referred to information provided by manufacturers of
specific systems.

Because your purchase represents a substantial
investment, we know you will want to take the necessary
measures to protect its value.  We have outlined a program
for proper operation, periodic maintenance and safety
inspections. We urge you to follow these recommendations.
If you have questions which are not fully covered by the
Owner’s Manual Packet, please consult your authorized
dealer for assistance.

Thank You For Selecting A Sea Ray

®

!

                                          Bon Voyage

W

ELCOME

52 Sundancer

International • 525 Sundancer

Owner’s Manual

Summary of Contents for 52 Sundancer



















































































































































































































Reviews: