52 Sedan Bridge
(525 Sedan Bridge)
3.6
S
ECTION
3 • U
SING
Y
OUR
B
OAT
ENGINE
SYNC
CRUISE
1 & 2
SLOW
IDLE
RPM
+/-
STATION
SELECT
SYNC
CRUISE 1
OFF
CRUISE 2
SLOW
IDLE
RPM
STATION
SELECT
10. E
NGINE
O
PERATION
S
WITCHES
(W
ITH
C
UMMINS
D
IESEL
E
NGINES
)
1. Engine Sync: WARNING - The engine
synchronization feature must be turned off
before docking or low-speed maneuvering;
this allows full and separate control of each
engine. Failure to turn off the engine
synchronization feature can cause personal
injury, damage to the vessel, and/or the
dock.
The engine synchronization feature is used to
electronically control the speed of both engines
using one throttle lever.
REFER TO ENGINE OWNER’S MANUAL FOR
COMPLETE OPERATING INSTRUCTIONS.
2. Cruise 1 / OFF/ Cruise 2: The marine cruise
control feature provide two adjustable engine
speeds. The cruise control can be used to run
the engine(s) at the optimal cruise rpm or trolling
rpm.
CRUISE 1 has a default setting of 2100 rpm.
CRUISE 2 has a default setting of 1200 rpm.
Note: The marine cruise control feature can be
used in conjunction with the engine
synchronization feature.
REFER TO ENGINE OWNER’S MANUAL FOR
COMPLETE OPERATING INSTRUCTIONS.
3. Slow Idle: The SLOW-IDLE feature allows for
lower idle speed for operation in “No Wake
Zones”. When activated, the SLOW-IDLE
feature reduces the engine speed to 550 rpm.
REFER TO ENGINE OWNER’S MANUAL FOR
COMPLETE OPERATING INSTRUCTIONS.
4. RPM +/- : The engine speed control (RPM +/-)
switch allows the idle speed to be adjusted in
25-rpm increments by pressing the rocker
switch.
1
2
3
4
E
NGINE
S
WITCH
P
ANEL
(F
IG
. 3.6.1)
Pressing the top of the switch increases (+)
engine rpm.
Pressing the bottom of the switch deceases (-)
engine rpm.
Note: Use slow deliberate clicks to increase or
decrease the engine rpm.
5. Station Select : The STATION SELECT feature
allows the operator to control the engine sync
from either the upper or optional lower control
station.
REFER TO ENGINE OWNER’S MANUAL FOR
COMPLETE OPERATING INSTRUCTIONS.
5
1
2
3
4
5