Sea-doo ISLANDIA Operation Manual Download Page 42

Page: 42 / 130

TYPICAL — THROTTLE LEVER

1. Increase speed
2. Decrease speed

Shifter

A 3-position lever:

– forward

– neutral

– reverse.

In order to shift, throttle lever must be
fully pulled back to idle speed.

Shift lever must be in neutral position
to allow engine starting.

NOTE:

With throttle lever at idle and

shift lever in neutral position throttle le-
ver should be locked.

TYPICAL

1. Throttle lever back to idle position
2. Shift lever in neutral position

NOTE:

To ease shifter use, line up the

shifter arrow with the appropriate dot
(Forward/Neutral/Reverse).

TYPICAL

1. Dots besides shifting position
2. Arrow on shifter

CAUTION:

Never rev the engine at

high RPM in reverse.

F09L3TY

F09L3UY



WARNING

Shift lever should only be used
when the engine is idling and craft
is completely stopped.



WARNING

Only use reverse at slow speed
and for the shortest time possible.
Always ensure the path behind is
clear of objects and persons in-
cluding children playing in shal-
low water.

F10L0BY

lmo2004_005a.book Page 40 Thursday, August 14, 2003 12:28 PM

Summary of Contents for ISLANDIA



































































































































Search results

Summary of Contents for ISLANDIA

Reviews:

Related manuals for ISLANDIA

Brands by name

Popular brands

Sea-doo ISLANDIA, Operation Manual

Search results

Summary of Contents for ISLANDIA

Reviews:

Related manuals for ISLANDIA

Brands by name

Popular brands