Sea-doo ISLANDIA, Operation Manual

Page: 76 / 130

74
PRE-OPERATION CHECKS
Some of the following items may not have been previously covered in this guide,
however they will be described in the MAINTENANCE or SPECIAL PROCE-
DURES section. Please refer to these portions to have more detailed information.
Prior to operating the craft, verify the following:
SUMMARY

WARNING
The pre-operation check is very important before operating the vehicle.
Always check the proper operation of critical controls, safety features and
mechanical components before starting. If not done as specified here, se-
vere injury or death might occur. Bring all safety equipment required by
local laws.

WARNING
Engine should be off and the safety lanyard must always be removed from
its switch prior to verifying any of the following. Only start craft once all
items have been checked and are operating properly.
ITEM OPERATION
✓
Safety lanyard ignition switch Check operation.
Hull Inspect.
Jet pump water intake/inlet grate Inspect/clean.
Bilge Drain. Ensure plug is secured.
Battery Inspect tightness of cables and retaining straps.
Main battery cut-off switch Ensure it is in the ON position.
Navigation lights Check operation.
Fuel tank, potable water tank and
oil reservoir Refill.
Engine compartment Verify fuel/oil system components.
Steering Check operation.
Throttle/shifter system Check operation.
Bilge blower and bilge pump Check operation.
Main and fountain water pumps Check operation.
Mandatory safety boating
equipment Check operation.
Storage compartment covers and
engine cover Ensure they are closed and latched.
lmo2004_005a.book Page 74 Thursday, August 14, 2003 12:28 PM