Sea-doo GTI Series Operator'S Manual Download Page 90

Page: 90 / 180

OPERATING MODES

smo2012-002-009_a

TYPICAL

1. Sport button

NOTE:

The following

important

mes-

sage will scroll across the multifunc-
tion display:

MESSAGE DISPLAYED

ENTERING SPORT MODE -
INCREASED ACCELERATION -
INSTRUCT PASSENGERS TO HOLD -
PRESS_SPORT_BUTTON

WARNING

Ensure passengers are advised
that sport mode provides for in-
creased accelerations and that
they are to hold on tightly.

2. Press the SPORT button again to ac-

tivate sport mode.

A scrolling SPORT MODE ACTIVATED
message will momentarily confirm
that sport mode has been activated.

MESSAGE DISPLAYED

SPORT MODE ACTIVATED

NOTE:

After a few seconds, the gauge

will revert to its normal display.

3. Ensure the SPORT mode indicator is

turned on.

SPORT MODE INDICATOR

NOTE:

The SPORT mode indicator will

come on and stay on as long as sport
mode is active.

Deactivating Sport Mode

To deactivate sport mode while riding
at speed, carry out the following:

WARNING

When deactivating sport mode, be
sure to maintain situational aware-
ness of other watercraft, obstacles,
or persons in the water.

1. Depress and hold the SPORT button

for at least 3 seconds.

NOTE:

The following message will

scroll in the multifunction display:
SPORT MODE DEACTIVATED.

______________

Summary of Contents for GTI Series





















































































































































































Search results

Summary of Contents for GTI Series

Reviews:

Related manuals for GTI Series

Brands by name

Popular brands

Sea-doo GTI Series, Operator'S Manual

Search results

Summary of Contents for GTI Series

Reviews:

Related manuals for GTI Series

Brands by name

Popular brands