Sea-doo GTI Series Operator'S Manual Download Page 60

Page: 60 / 180

INFORMATION CENTER (GAUGES) (GTI/GTR/WAKE)

HIGH TEMPERATURE INDICATOR

Refer to

TROUBLESHOOTING

sub-

section for details.

11) iBR Fault Indicator

The iBR fault indicator comes ON
when a fault in the iBR system has
been detected.

iBR FAULT INDICATOR

Refer to

TROUBLESHOOTING

sub-

section for details.

12) ECO Indicator

The ECO indicator and a smile in the
fuel tank symbol comes ON when

FUEL ECONOMY MODE

is activated.

ECO MODE INDICATOR
(Fuel Economy Mode)

Refer to

OPERATING MODES

subsec-

tion for detailed instructions.

13) CRUISE Mode Indicator

The cruise mode indicator comes ON
when:

– CRUISE MODE has been activated.
– SLOW SPEED MODE has been acti-

vated.

CRUISE MODE INDICATOR

Refer to

OPERATING MODES

subsec-

tion for detailed instructions.

14) iBR Position Indicator

Provides an indication of the iBR gate
position.

– N (neutral)
– F (forward)
– R (reverse).

iBR POSITION INDICATOR

15) SKI MODE Indicator

The ski mode indicator is ON when SKI
MODE is active.

______________

Summary of Contents for GTI Series





















































































































































































Search results

Summary of Contents for GTI Series

Reviews:

Sea-doo GTI Series, Operator'S Manual, Page: 60 / 180

Search results

Summary of Contents for GTI Series

Reviews: