Sea-doo GTI Series, Operator'S Manual

Page: 68 / 180

EQUIPMENT
smo2011-003-025_a
TYPICAL
1. Front storage compartment cover
2. Latch lever
WARNING
Never carry any loose, heavy,
sharp, or breakable objects in the
storage compartment. Do not ex-
ceed maximum load capacity; 9 kg
(20 lb). Never operate the water-
craft with the front storage com-
partment cover open. This is not a
watertight compartment.
3) Seat
Removing the seat provides access to
the engine compartment.
The seat latch is located at the back
end of the seat.
To remove the seat, pull up on the latch
handle and lift the back end of the seat
off the latch pin. Then pull the seat up
and backwards to unhook the front of
the seat from it's retainer and remove
the seat from the watercraft.
smo2009-002-129_a
TYPICAL - SEAT LATCH
1. Seat latch handle
2. Latch pin
3. Pin insertion hole
To install the seat, insert the forward
end of the seat in it's retainer.
smo2011-003-012_a
1. Forward seat tab
2. Forward seat retainer
Align the seat latch with the latch pin
and firmly press down on the rear por-
tion of the seat to lock it in place.
Pull up on the rear portion of the seat to
ensure it is properly latched.
CAUTION Ensure the latch is
properly locked onto the pin.
4) Passenger Handhold
The seat strap provides a handhold for
a passenger to hold on to when riding.
The sides of the molded grab handle at
the rear of the seat also provide a hand-
hold for a passenger. The rear portion
of the molded grab handle provides
66
______________