Sea-doo 2014 Spark Series Operator'S Manual Download Page 127 | Manualshive

Page: 127 / 148

background image

the warranty coverage period under the conditions described herein. BRP’s
responsibility is limited to making the required repairs or replacements of parts.
No claim of breach of warranty shall be cause for cancellation or rescission of the
sale of the Sea-Doo personal watercraft to the owner. You may have other legal
rights which may vary from country to country.

In the event that service is required outside of the country of original sale, the
owner will bear responsibility for any additional charges due to local practices
and conditions, such as, but not limited to, freight, insurance, taxes, license fees,
import duties, and any and all other financial charges, including those levied by
governments, states, territories and their respective agencies.

BRP reserves the right to improve or modify products from time to time without as-
suming any obligation to modify products previously manufactured.

8. TRANSFER

If the ownership of a product is transferred during the warranty coverage period,
this warranty shall also be transferred and be valid for the remaining coverage
period provided BRP or an authorized Sea-Doo Distributor/Dealer receives a proof
that the former owner agreed to the transfer of ownership, in addition to the
coordinates of the new owner.

9. CONSUMER ASSISTANCE

1. In the event of a controversy or a dispute in connection with this limited

warranty, BRP suggests that you try to resolve the issue at the Sea-Doo
Distributor/Dealer level. We recommend discussing the issue with the autho-
rized Sea-Doo Distributor/Dealer's service manager or owner.

2. If further assistance is required, the Sea-Doo Distributor/Dealer service depart-

ment should be contacted in order to resolve the matter.

3. If the matter still remains unresolved then contact BRP by writing at the address

listed below.

For countries within Middle East and Africa, please contact our European
office:

BRP EUROPE N.V.

Consumer Assistance Center
Skaldenstraat 125
9042 Gent
Belgium
Tel.: +32 9 218 26 00

______________

125

«
...
125
126
127
128
129
...
»

Summary of Contents for 2014 Spark Series





















































































































































Reviews:

No comments

Related manuals for 2014 Spark Series

Brand: Regal Pages: 437

Brand: Mercury Pages: 42

Brand: NorthStar Pages: 56

Brand: Westport Pages: 11

Samba Jeanneau Sun Odyssey 45 2007

Brand: Hermes Yachting Pages: 26

Brand: Mercury Pages: 155

210 Challenger Series

Brand: Sea-doo Pages: 156

Brand: Sea-doo Pages: 168

Brand: Sea-doo Pages: 180

Brand: Sea-doo Pages: 180

Brand: Sea-doo Pages: 192

Brand: S/C Yachts Pages: 10

Brand: Najad Pages: 44

Brand: Zboat Pages: 35

Brand: Jeanneau Pages: 106

WaveRunner SuperJet 700 2001

Brand: Yamaha Pages: 107

Brand: Yamaha Pages: 277

WaveRunner VXR 2018

Brand: Yamaha Pages: 108

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands