Attaching the Optional Accessories
E-26
1
2
Attach the washer with a cutout
(B) and the washer without a
cutout (C) to the bolt (A) supplied
with the ergo grip as shown
Remove the right and left
plug bolts using the supplied
attachment tool
3
Apply a small amount of silicone
grease to the plug bolt mounting
holes on the housing, and then
align the ergo grip with the hole
4
Insert the bolt with the washers
attached to it into the mounting
hole, and firmly attach the ergo
grip by tightening the bolt using
the hex wrench supplied with
the ergo grip
Attaching the Ergo Grip (option)
=
The shape of the ergo grip for the right-hand is not identical to the one for
the left-hand. Please check the left-to-right relationship before attaching,
and make sure not to attach the grips in the opposite positions.
=
Carefully observe the instruction manual for the ergo grip before use.
=
To protect the mounting holes from
corrosion or rust, do not remove the
plug bolts from the housing when the
ergo grip is not attached to the housing.
attachment tool
Plug bolt
Ergo Grip
CAUTION
CAUTION
=
Make sure not to lose the plug bolts
after removal.
CAUTION
A
B
C
