E-11
1
2
3
4
1
2
CAUTION
CAUTION
Attaching and Detaching the Port
Detaching the port
Set the port lock to the OPEN position
=
Make sure that the port lock pin is
engaged with the notch in the port.
=
Do not attempt to remove the port with the port lock in the LOCK position.
Doing so could damage the quick shoe base.
=
If using NX-90PRO ports (with 4-digit part numbers and black bayonets)
with this model, it is necessary to modify the port’s bayonet. NX-90PRO
ports with 5-digit part numbers and gray bayonets can be used as is.
For details, please contact SEA&SEA or a SEA&SEA authorized dealer.
Pull the port lock on the underside
of the quick shoe base toward
OPEN until you hear the sound
of it clicking into place
Align the positioning mark on the
front case with the OPEN mark
on the port, insert the port into
the front case, and then rotate the
port in a clockwise direction until
it stops
Before attaching the port, make sure
there are no specks of dust, scratches,
or deformities on the O-ring and the
O-ring contact surfaces.
Make sure that the positioning
mark on the front case and the
LOCK mark on the port are aligned
Hold the front case firmly and rotate the port in a counterclockwise
direction
Push the port lock toward LOCK
until you hear the sound of it
clicking into place
•
Port lock pin
OPEN
LOCK
OPEN
LOCK
