E-20
Connecting the Strobe
Connect the strobe with the fiber-optic cable (option) when the strobe is
triggered by sensing the light from the camera's built-in flash.
CAUTION
=
Before inserting the fiber-optic cable, check to make sure that there are no
scratches or dirt on the connector surface. Scratches or dirt may cause the
strobe to malfunction.
=
To protect the surface from scratches or dirt, do not remove the caps from
the fiber-optic cable sockets when the cable is not inserted.
Remove the fiber-optic cable
socket caps
Insert the fiber-optic cable's
connector into the socket until
it stops
When connecting the strobe with
the fiber-optic cable
(option)
=
Do not remove the caps from the
fiber-optic cable socket when not
connecting a fiber-optic cable.
Fiber-optic cable socket cap
1
2
