SE Devices
–
Modular Z-Wave Devices
–
Installation Manual
Page 11
Remove the Wires from the Mains Connector
Use a small flat head screwdriver, and firmly push down the orange release mechanism above the
wire. Pull the wire gently to free it from the Connector. Repeat until all wires are free from the
Connector.
Remove the Back Unit from the metal frame
Using a small flat head screwdriver, push the locking clips out from the metal frame and gently bend
the frame to release it from the locking clip. Repeat the procedure for al 4 locking clips in order to
free the back unit completely from the frame.
