SE Devices
–
Modular Z-Wave Devices
–
Installation Manual
Page 3
Device Components
A functioning Z-Wave device is assembled using at least 4 separate parts:
-
Front Units
–
Provides the Userinterface
-
Mounting Frame
–
Fixes the Front Unit to the wall
-
Back Unit
–
Provides the Electrical interface (dimmer or relay), and power for the Front Unit
-
Back Unit Mounting Bracket
–
Used to mount the Back Unit in a Wall-box
Optionally the following components can be used for additional functionality:
-
Room Sensor
–
Can be fitted to the bottom of a frame, to provide a Room Temperature
sensor for the lower Front Unit.
-
Floor Sensor
–
Can be fitted to all Back Units except the 1-10V dimmer
-
Cascade Power Connector
–
Can be used to power a Front Unit from an adjacent Front Unit,
in stead of from a Back Unit.
