background image

中文

EN

D

IMPOR

TANT SAFET

Y INS

TRUC

TIONS

7

6

IMPORTANT 

SAFETY INSTRUCTIONS

The products included in this manual have been engineered and manufactured to ensure your personal 

safety. However, 

IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK, FIRE HAZARD AND 

OTHER HEALTH RISKS

. Always follow the basic precautions listed here to avoid the possibility of serious 

injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precauti-

ons include, but are not limited to, the following items in this chapter.

CAUTION

RISK OF ELECTRONIC SHOCK

DO NOT OPEN

 

ELECTRICAL SAFETY PRECAUTIONS

DO NOT EXPOSE ANY OF THIS EQUIPMENT TO RAIN OR MOISTURE, DRIPPING OR 

SPLASHING LIQUIDS. OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD 

NOT BE PLACED ON THIS APPARATUS.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT ATTEMPT TO OPEN ANY PART OF THE 

UNIT. THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

EQUIPMENT INCLUDED IN THIS MANUAL REQUIRE AC POWER SUPPLY. TO COMPLETELY 

DISCONNECT THEM FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD 

PLUG FROM THE AC RECEPTACLE. THE MAINS PLUG OF THE POWER SUPPLY CORD 

SHALL REMAIN READILY OPERABLE.

NOISE EXPOSURE PRECAUTIONS

PRODUCTS DESCRIBED IN THIS MANUAL CAN RADIATE HIGH SOUND PRESSURE 

LEVELS (SPL) THAT CAN LEAD TO IRREVERSIBLE HEARING DAMAGE. 

SE AUDIOTECHNIK® RECOMMENDS TO RESPECT THE TIMES OF EXPOSURE TO HIGH SPL.

Noise level (dBA)

85

94

97

112

127

Max. recommended exposure time 

per 24 hours

8 hrs.

1 hr.

30 min.

56 sec.

1 sec.

Noise exposure recommendations according to US National Institute for Occupational Safety and Health (NIOSH).

GRAPHICAL SYMBOLS IN THE PRODUCT

The lightning bolt triangle is used

 to alert the user to the risk of 

electric shock.

Symbol indicating that the equipment 

is for indoor use only.

The exclamation point triangle is 

used to alert the user to important 

operating or maintenance 

procedures and instructions.

Symbol for conformity with 

Directive 2002/96/EC and 

Directive 2003/108/EC of the 

European Parliament, on waste 

electrical and electronic equipment 

(WEEE).

The CE mark indicates the conformity 

with the relevant EU directives for 

safety, health and environmental 

protection. See the 

Manufacturer's 

Declaration

 section.

The RCM mark indicates the conformity 

with the relevant Australian and New 

Zealand requirements for electrical 

safety, EMC, EME and telecommuni-

cations compliance.

The CCC mark indicates the 

conformity with the relevant 

Chinese directives for safety, health 

and environmental protection.

GRAPHICAL SYMBOLS IN THIS MANUAL

Symbol for important safety 

information related with the 

risk of electric shock.

Symbol for important concepts 

and information for a better 

understanding of the functioning 

of the product.

Symbol to alert the user about 

important operating or 

maintenance instructions.

Symbol for practical tips and ideas 

useful to ensure the correct use of the 

product and improve its operation.

Summary of Contents for B 15



























Reviews: