SE Audiotechnik B 15, Manual

Page: 16 / 26

中文
EN
D
LCD PL
ATE AMPLIFIER
31 30
SYSTEM SETTINGS > SW INFORMATION
This screen shows the most relevant information about the amplifier's firmware, which can be important
not only for users but also for service technicians.
- MCU : Software version of the Micro Controller Unit.
- FW : Firmware version.
- Model : model of your SE AUDIOTECHNIK
®
product.
Figure 31. SW Information menu.
SW INFORMATION
Back
> MCU: 0.0.4.2
FW: 20190624
MODEL: S12 PRO
SYSTEM SETTINGS > LOCK
In the Lock menu, the user can set one of the following options for the screen locking function:
- Automatic Lock : This option will lock automatically the amplifier's screen after 10 seconds by
default. To set a different value, between 2 and 60 seconds, follow the same procedure described for
the LCD Backlight submenu.
- Lock Now : This option will lock the screen instantly. The selected settings for Automatic Lock or
No Lock , are kept.
- No Lock : This is the option set by default. It will disable the automatic lock function and make the
screen always accessible.
LOCK
Back
> Automatic Lock
Lock now
Never Lock
Figure 32. Screen Lock menu.
Remember that when the screen is locked, the " L " letter is shown in the top-right part of the Overview
screen. To unlock the amplifier, press the controller for 3 seconds until the message " Screen Unlocked! "
is shortly displayed on the screen. This message details the active preset as well.
SYSTEM SETTINGS > MENU TIMEOUTS
In the Menu Timeouts , the preferred behaviour of the main MENU can be configured according with the
options:
- On, jumping out : After five minutes of inactivity, the display returns to the Overview screen.
- Off, stay in menu : the display stays in the current menu indefinitely. This option is selected by default.
Figure 33. Menu Timeouts menu.
MENU TIMEOUTS
> Back
On, jumping out +
Off, stay in menu
FACTORY PRESETS
The B 15A self-powered subwoofer always has to be operated with one of the factory presets from the
Preset Library , which are the basis for the user presets. The presets available are:
Product Preset Name Description
M-F3A PRO MF3AP Default preset for systems comprising M-F3A PRO units.
M-F3A MF3A Default preset for systems comprising M-F3A units.
L 35 L35 Default preset for systems comprising L 35 units.
SMX 12A SMX12 Default preset when using SMX 12A monitor as PA unit.
GENERAL GENERAL General preset for use with other products systems.
If the preset library on your product differs from the list shown above, please check your firmware version
in the System Settings > SW Information menu and contact your dealer to update it.