R1.1
Copyright © 2016 SDRplay Limited
26
SDRuno User Manual
10.3 Tmate server options
The Tmate server options are accessible only from the SDRuno instance #0 from here: Main window-
>SETT.->TMATE.
10.3.1
ENABLE SERVER
This checkbox enable/disable the Tmate server; the server status is reported on the window bottom: once
enabled, if everything is ok you shoul
d read “Tmate server running.”. If the program reports an error, first
check that no other application has allocated the Tmate (remember, Tmate is “single client”).
Default: disabled
10.3.2
AUTO ASSIGN
This checkbox let you choose between two “assigning” options for the Tmate controller.
If AUTO ASSIGN is checked, the VRX controlled by the Tmate is the one that currently has one of its
SP1, SP2, RX Control or RX EX Control
windows fo
cused (the “SDRuno” label in the window plate is
red). This is the simplest and fastest way to assign the Tmate controls to a VRX.
If AUTO ASSIGN is unchecked, you have to assign the Tmate to a specific VRX by the “TCTR” button
located on the upper-right border of the relative RX Control window. To avoid confusion, a mutual
exclusion logic is implemented: only one VRX can be assigned at a given time.
Default: enabled
10.3.3
TMATE 2
This checkbox let you choose between the two Tmate models. You can have both a Tmate and a Tmate 2
controllers connected to the system at the same time. In order to change this setting the Tmate server
must be stopped (uncheck ENABLE SERVER).
Default: disabled (controller type is Tmate)
10.3.4
TMATE 2 USES VRX BACKG.
The Tmate 2 controller features an LCD display with a RGB backlit. This checkbox let you choose
between two backlighting modes:
If checked, the LCD backlighting colour follows the assigned VRX background colour.
If unchecked, the LCD backlighting is set to a fixed neutral colour.
Default: enabled
