Operation & Maintenance Manual
──
LG968 /969Wheel Loader
66
△
!
NOTICE
z
Never
run at high speed if the machine runs at slope or
uneven ground.
z
Select proper transmission when go down the slope and
never
change the transmission at that time.
z
Never
run over speed going down the slope, and use the
brake pedal to slow the speed.
3.3.2 Gearshift, Changing between Forward and Backward
z
Press the accelerograph a little bit during change transmission to prevent too much impulsion.
z
It is best the change the running direction (change from forward to backward or from backward
to forward) after stop the machine to get the best comfort and prolong the life utmost.
z
No need to stop and brake during running. Release the accelerograph and operate the
transmission lever at the same time when change the speed from low to high; when change the
speed from high to low, release the accelerograph first and then change the transmission slowly.
3.3.3 Turning
z
Turn the steering wheel the same as the wished turning direction of the machine to turn.
z
The machine is centered at swivel pin, the front and rear frame will bend to turn.
△
!
WARNING
z
Never
turn suddenly or turn on the slope at high speed.
z
The machine can not turn if the engine stops
3.3.4 Braking
z
Never
put your foot on the brake pedal unless necessary.
z
Never
press the brake pedal again and again unless necessary.
z
Never
try stopping the engine and put the gear control lever at
neutral
position during going
down the slope.
z
Never
use left brake pedal (if left and right brake pedals are assembled) during driving on ramp
to prevent the power being cut off to induce danger.
