Operation & Maintenance Manual
──
LG968 /969Wheel Loader
53
after engine starting, pull out the key, or it will return to
ON
position automatically. If the start
button is assembled, this position is not used; start button is only used for electric power
control.
z
Rocket Switches
This panel includes those switches of rear headlight, front light lamp, back light lamp, rain brush,
water jet pot and etc. Be sure the dome light is off when traveling on the road.
Please see “
1.1
General View of Controls and Gauges Figure3-1
” in this chapter.
z
Rain Brush Switch:
Press bottom side, rain brush will work; press top side of the rain brush will stop.
z
Water Jet Switch:
Push bottom side of button, eject water to the front glass of cab; release the button, water stops.
z
Back Light Lamp Switch:
Press bottom side, the back light, front and rear outline-showing lamp will be on; press top side,
the lamp will be off.
z
Heater Switch (if assembled):
Press bottom side, heater works; press top side, heater stops.
When the heater or air condition work, adjust the air outlet in the front of gauge panel to adjust
wind speed so that the frost can be cleaned or warm (cool) wind will be blown.
z
Front Headlight Switch:
Press bottom side, the low beam of the front headlight of front frame will be on;
Press top side, the high beam of the front headlight of front frame will be on.
No side is pressed, the front headlight will be off.
z
Rear Headlight Switch:
Press bottom side, the low beam of the rear headlight of engine cover will be on;
Press top side, the high beam of the rear headlight of engine cover will be on.
No side is pressed, no lamp will be on.
z
Front (Rear) Light Lamp Switch:
Press bottom side, the front (rear) light lamp will be on; Press top side, the lamp will be off.
z
Warning Lamp Switch:
Push this button down, all the turning lamps will blink used for emergency circumstance, sending
warning light to absorb the attention of other vehicles and passersby. When the button springs
back, all the turning light will blink.
