Operation & Maintenance Manual
──
LG968 /969Wheel Loader
26
7 SAFETY PARKING
7.1 Pay Attention to the Safety of Yourself and Others
z
Park the machine at plain ground. The working equipment should be put on the ground.
z
Never
park at clamp. If it is necessary, the clamp angle should be less than
20％.
z
If the machine broken-down or need to park at surrounded place, put bars, signal, flags and
warning light. Make sure the other cars can see clearly. But do not block traffic.
z
When parking the machine, unload all the material on the machine, low the buckel to the ground,
shut down the engine, pull the parking brake switch and put it at the braking position. Lock the
engine and keep the key well. Climb down the machine slowly according to “three point” method,
never
jump down to the ground.
△
!
WARNING
NEVER
get on or off the machine during driving.
7.2 Notice for Cold Area
z
Clear the water, snow or dust attached on wires, switches, power insert or sensor and the covers
of these parts. Otherwise, the ice will form and the unpredictable accident may be caused.
z
Preheat sufficiently. The machine may delay if do not preheat before operating the conrol handle
of working equipment and the unpredictable accident may be caused.
z
Operate the working equipment control handle to let the hydraulic oil cycle in the hydraulic
system (let the pressure of system up to the system setting, and then release to let the oil flow
back to the hydraulic oil tank ) to preheat the hydraulic oil, so as to guarantee better reaction and
prevent malfunction.
z
Do not charge if the storage battery freeze and do not use power to start the engine. It is
dangerous and can cause the fire. Please refer to “
CHAPTER III 3.5.3 Operation in
Cold Weather
”.
8 SAFETY EXAMINE AND REPAIR
