Operation & Maintenance Manual
──
LG968 /969Wheel Loader
X
SAFETY INFORMATION
The operator should know and obey the safety criterion described in national and local laws. If there
is no such criterion, please follow the rules described in this manual.
Most accidents are caused by the failure to follow fundamental safety regulations for the operation
and maintenance of machines. To avoid accidents, please read, understand and follow all precautions
and warning in this manual and on the machine before performing operation and maintenance.
Safety precautions are specified in SAFETY of Chapter I.
Because of potential danger that is impossible to be predicted. Safety information described in this
manual cannot include all of the safety precautions, and we also cannot predict every circumstance
that might involve a potential hazard in operation and maintenance. Therefore, if procedures or
actions which are not recommended in this manual are used, you must be sure safety of the operator
and machine. Otherwise, consult us or the dealers.
The safety precautions for operation and maintenance in this manual only apply to those conditions
specified by the machine. If the uses of the machine are not specified in the manual, users should take
full responsibility by themselves. We will not bear any safe responsibility for the operators or
machine.
In any case, you should not engage in prohibited operations as described in this manual.
The following signs are used for identifications of safety information in this manual:
△
!
DANGER
──
This word is used on safety messages and safety labels where there is a
high possibility of serious injury or death if the hazard is not avoided. These safety messages or
labels usually describe precautions that must be taken to avoid the hazard. Failure to avoid this
hazard may also result in serious damage to the machine.
△
!
WARNING
──
This word is used on safety messages and safety labels where there is a
potentially dangerous situation. Failure to avoid this hazard may also result in serious injury or
death. Failure to avoid this hazard may also result in serious damage to the machine.
△
!
NOTICE
──
This word is used on safety messages and safety labels for the hazards that
could result in minor or moderate injury if the hazard is not avoided. This word is used for
precautions that must be taken in order to avoid actions which could shorten the life of the
machine.
