SDLG LG6210E, Maintenance Manual

Page: 310 / 782

Maintenance Manual
──LG6210E
Hydraulic Excavator
292
Measure the profile of sprocket tooth
1. Clean the sprocket teeth.
2. Align P1, P2, P3 of sprocket tooth wear
measurements (1), and the grinding line of sprocket
teeth (3).
- - Part number of sprocket tooth wear
measuremeter:14516700
3. Measure 2 times and get the average.
4. If the measured value (A) is beyond the wear limitation,
replace the sprocket.
Measure sprocket tooth width
1. Clean the sprocket teeth.
2. Measure sprocket tooth width with a vernier caliper
(A).
3. 3 Measure 2 times and get the average.
4. If the measured value (A) is beyond the wear limitation,
replace the sprocket.
Sprocket, replacement
Tool
14,290,046 Track pin shaft press tool
Warning!
Work includes heavy parts, if you do not
concentrate, it can cause serious injury.
1. Removing the track. Refer to Track chain assembly,
removing P273
2. Lift the sprocket(4).The method is to insert a wooden
block between track frame (2)and linkage(1)
Fig.29 Measure the wear of sprocket teeth
1.
Sprocket teeth wear measurement
2.
New sprocket teeth line
3.
Sprocket teeth wear line
A. Wear of profile
Fig.30 Measure the wear of sprocket teeth
A. Vernier cliper
B.Wear of teeth
Fig.31 Remove the sprocket
1.Track connection 4.Sprocket
2.Track frame 5.Bolt
3.Wooden block