Chapter 3: Communications System
The Spirometry Source
84
1-800-678-5782 1-508-238-7033
www.sdidiagnostics.com
To install the Software and Driver, follow these steps:
1
Start up the spirometer (consult the corresponding manual
for use).
2
Insert installation CD and Run D:\Setup.exe (or appropriate
cd drive) and follow prompts for cd installation.
3
Open software and connect spirometer to PC with the USB
cable. As it is the first time that the equipment is connected
to the computer, the Windows
<<New Hardware Detected>>
screen will appear, with the name of the equipment that you
have connected. Select
<<Next>>
4
A screen will appear that allows you to select between two
options:
First: Find best controller for your device
Second: Show a list of all controllers in a location
Select the
Second
and click on
<<Next>>
5
Now a screen will appear which allows you to select between
Show All Hardware or Show Compatible Hardware. Select
<<Show All Hardware>>
and click the
<<Use Disk>>
button.
6
If your operating system is Windows 98, select the file
D13TEST in the directory D:\W98 of the spirometry CD. For
other operating systems such as Windows 2000, Windows
XP (software is not compatible with Vista), select the file
“sibelusb” of the directory D:\W2k_WXP. Press
<<OK>>
(Windows XP may find this file automatically).
7
Click on
<<Next>>
and
<<Finish>>
. The Driver will now install
itself.
8
Under
Setup
from the main menu, Select
<<Links>>
Transducer: Spirometer
Equipment: DMicro\Astra
Channel: Serial Channel
Serial Port: COM1
Then click
√
√
√
√
√
Your spirometer is now ready to use.