Chapter 6: Upkeep, Preventive & Corrective Maintenance
The Spirometry Source
102
1-800-678-5782 1-508-238-7033
www.sdidiagnostics.com
4
You can then leave it to dry at room temperature.
5
Reassemble the turbine in the housing.
Top level disinfection:
If you suspect contamination, use one of the more
complex antiseptic solutions. For example, replace Step
2 by submerging it in a glutaraldehyde solution (or similar)
for 10 minutes (follow the manufacturer’s instructions).
PRECAUTION
DO NOT EXPOSE THE TURBINE TO TEMPERATURES
OF OVER 60ºC OR BELOW 0ºC. DO NOT USE
SOLVENTS OR OTHER SIMILAR SUBSTANCES FOR
CLEANING AS THEY MAY DAMAGE IT.
SPIROMETER
The spirometer is cleaned gently with a dry cloth or a
cloth dampened slightly with soapy water. Pay special
attention to ensure no liquid enters the inside or
connectors and connections.
Do not use abrasive substances or solvents.
WARNING