1-800-678-5782 1-508-238-7033
www.sdidiagnostics.com
8
The Spirometry Source
ELECTRICAL RISKS
Dot NOT disassemble the equipment casing. The device
must only be serviced and repaired by skilled personnel.
The contact with voltage inside the device may cause
serious injury.
Do NOT use damaged accessories.
Do NOT submerge the parts of the device in any liquid.
Consult the equipment cleaning method in Chapter 8,
Section 8.1. UPKEEP, PREVENTIVE AND CORRECTIVE
MAINTENANCE.
To ensure vital safety features under the EN 60601-1-1
standard, only equipment compliant with the electrical
safety standards in force may be connected to this device.
To connect ASTRA 300 to a non-medical device with a
ground conductor, you must install an additional ground
conductor to the non medical device.
The equipment must be stored and used within the
temperature, pressure and humidity ranges specified.
RISKS OF EXPLOSION
Do NOT use the equipment in the presence of volatile
anesthetics or inflammable gases.
RISKS OF CONTAMINATION
Turbine transducer: To avoid the risk of contamination or
cross infection, the turbine must be cleaned before use
or used with a protective barrier filter as indicated in this
manual.
Disposable mouthpieces must not be reused.
Pulse oximeter finger clip: The pulse oximeter finger clip
should be washed after each patient use using either
soapy water or using a medical equipment disinfectant of
choice.
Safety