background image

Galaxy 5100RS-2W  -  Page 21

5.

Ignition Door Unlocking.

Selects whether or not the system automatically unlocks the doors when

the ignition is turned off. The Ignition Door Locking feature may be programmed to unlock all doors or

the driver’s door only.  If driver’s door only is selected, the optional Passenger Unlock wire must be

connected. (

See Two Stage Door Lock Diagrams)  

6.

Door Unlock Pulse.

Selects between one pulse or two pulse operation for the door unlock output.

Many new import vehicles’ factory door locking systems require two pulses on the proper wire to unlock

the doors.  These systems can be interfaced directly without the use of relays or any additional circuitry

by programming the system for double unlock pulse. 

7.

Door Lock Pulse Length.

Selects between a 1, 3 or 0.1 seconds output for door locking and

unlocking.  Program to 3 seconds for vehicles equipped with vacuum door locking systems.

8.

Passive Door Locking.

Selects whether or not the system will automatically lock the doors during

Passive Arming and Auto Rearming mode. 

9.

Passive Arming Entry Delay.

When selected, the siren will chirp for 10 seconds before sounding if

a door is opened.  The system may be disarmed by simply turning on the ignition when programmed

Branch Feature

Button 1 (default)

Button 2

Button 3

1. Arm Mode

Manual Arming 

Passive Arming

2. Auto Rearming Mode

Disabled 

Enabled

3. Arming Chirps

Siren Chirps En

Silent                  Siren & Horn Chirps En.

4. Ignition Door Locking

On

Off

Set Override Code  

5. Ignition Door Unlocking

Unlock All

Unlock Driver Only

Off

6. Door Unlock Pulse

Single

Double

7. Door Lock Pulse Length 

1 second

3 seconds

0.1 seconds

8. Passive Door Locking

Disabled

Enabled

9. Passive Arming Entry Delay 

Disabled

Enabled

10. Ignore Open Door Report

Off

Ignore

11. Aux 2 Activate on Arm

Off

On

12. Aux 1 Mode

Pulsed

Timed

Latched

13. Aux 2 Mode

Pulsed

Timed

Latched

14. Disarm with Aux 1

Disabled

Enabled

15. Start in Valet Mode

Disabled

Enabled

16. Lock after Start

On 

Off

17. Lock after Shutdown

On 

Off

18. Engine Run Time

15 minutes

25 minutes

19. Automatic Start Mode

2 hours

1 hour

20. Engine Sense Mode

Tachless

21. Remote Start Program        RPM Learn/Tach Monitor Gas Engine

Diesel Engine

22. Ignition 2 Output Program

Ignition 2 Output

Accessory 2 Output Starter 2 Output

23. Horn Honk Output

Horn Output

Ignition 3 Output

24. Turbo Timer

Disabled

Enabled

25. Extended Parking Lights

On

Off

26. Warn-Away Report

Enabled

Disabled

Summary of Contents for 5100RS-22W





































Reviews: