17
3. inStall GUide
**iMPortant**
the flue should not include more than two bends. the angle of these bends cannot exceed more than
45° and can have no more than one length of 900mm flue between them.
step 11.
position and secure the ceiling plate with the screws and spacers.
step 12.
Clean the flue pipe to ensure all marks (finger or otherwise) are removed prior to proceeding.
step 13.
if flue offset is required, refer to aS/nZS 2918:2018 Section 4 flue System installation
ProCess For Flue systeM installation (Cont.)
these instructions are to be kept by the user, the installer under any circumstances mUSt not dispose
of this manual. following installation it is recommended the installer review any questions or queries
the new user might have, this should include lighting the fire and explaining the various functioning
components of the appliance. Insist on the wood quality, on the need to light the fire correctly and have
correct combustion in order to avoid all problems related to smoke emission in the room or blackened
glass.
these installation instruCtions are an integral Part oF the aPPlianCe
anD shoulD be kePt inDeFinitely. iF the FirePlaCe is solD this Manual Must
aCCoMPany the unit.
CoMMissioning the aPPlianCe
