14
3. inStall GUide
step 1.
ensure all components required are prepared.
step 2.
If a floor protector (hearth) is to be used, position now, refer to clearances (in specifications) for
a guide on the appropriate positioning to accompany clearances and the floor protector (hearth).
step 3.
Position the appliance, refer to clearances (in specifications) for minimum requirements.
step 4.
Prior to proceeding ensure both the firebox and hearth are fixed in position.
iMPortant: the appliance is required to be installed on floors with an adequate load bearing capacity
step 5.
refer to flue System installation (pg. 15 - 16) & aS/nZS 2918:2018.
Part a - Firebox installation
Prior to proceeding with installation thoroughly investigate the materials composing the surrounding
back walls, floor and ceiling of the desired position of the firebox. Combustible heat degrading
materials, electric wiring or gas piping MUST NOT be located within the distance specified by the
clearances (see specifications). Ensure the flooring can support the weight of the appliance (see weight
in specifications). ALL preparatory work required prior to installing the firebox (external air intake etc)
must be completed before proceeding with the installation.
We strongly recommend installing the appliance in a weather tight room. Dust from works may be
deposited on the appliance and burned when it is commissioned, causing ceilings to blacken. it is
therefore recommended that all preparatory works be completed prior to installing the appliance.
Firebox loCation
