Sculpt AXIS 1000 Installation & User Manual Download Page 21 | Manualshive

Page: 21 / 26

background image

21

test reports

6. teSt reSUltS

teStinG laBoratory
manUfactUrer
model
iSSUe date
inveStiGatinG officer
reSUltS

conclUSion

Hrl technology
axis
axis po-1000 Sf free Standing
09.04.2017
Steve marland
the appliance particulate emissions factor was 1.2/kg of hard wood that
complies to AS/NZS 4014.1 and the average efficiency of the appliance
for all burn rates was 66%

the axis i1000 solid fuel appliance complies with the requirements of

aS/nZS 4012/4013(2014).

axis i1000 free standing partiCulate emissions, power output & effiCienCy test

teStinG laBoratory
manUfactUrer
model
iSSUe date
inveStiGatinG officer
reSUltS

conclUSion

Hrl technology
axis
axis i-1000 p-df free Standing
06.04.2017
Steve marland
the appliance particulate emissions factor was 1.0/kg of hard wood that
complies to AS/NZS 4014.1 and the average efficiency of the appliance
for all burn rates was 62%

the axis i1000dS solid fuel appliance complies with the requirements of

aS/nZS 4012/4013(2014).

axis i1000 ds free standing partiCulate emissions, power output & effiCienCy test

«
...
19
20
21
22
23
...
»

Summary of Contents for AXIS 1000



























Reviews:

No comments

Related manuals for AXIS 1000

Brand: United States Stove Company Pages: 16

Brand: J. A. Roby Pages: 4

Brand: Napoleon Pages: 2

Brand: Napoleon Pages: 84

Brand: Napoleon Pages: 16

Brand: Napoleon Pages: 4

Brand: Napoleon Pages: 56

Brand: Napoleon Pages: 36

Brand: Napoleon Pages: 24

Brand: Napoleon Pages: 48

Brand: Napoleon Pages: 2

Brand: Napoleon Pages: 52

Brand: Napoleon Pages: 40

PATIOFLAME GPFN

Brand: Napoleon Pages: 32

Brand: Napoleon Pages: 36

Brand: Safavieh Outdoor Pages: 2

Brand: e-Flame USA Pages: 6

Brand: Comfort Glow Pages: 34

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands