30
If you want to go back to previous step, please press „Back‟ button on the
bottom of this page.
3. Basic Setting
Here are descriptions of every setup items:
Wireless Module (1): Please click “Enable” to start using the wireless
function of this router, or select “Disable” to close
the wireless interface of this router.
Band (2): Please select a Bane type from the dropdown list of
„Band‟, It allows you to set the AP fix at 802.11b or
802.11g or 802.11n mode. You also can select B+G
or B+G+N mode to allow the AP select 802.11b,
NOTE: Some service providers use ‘DHCP’ (Dynamic Host
Configuration Protocol) to assign IP address to you. In this case, you
can choose ‘Cable Modem’ as Internet connection type, even you’re
using another connection type, like xDSL. Also, some cable modem
uses PPPoE, so you can choose ‘PPPoE xDSL’ for such cable modem
connection, even you’re using a cable modem.
1
2
3
4
5
6
