background image

4

SECTION 1: GENERAL INFORMATION

1.1 DEVICE FIRMWARE & TUNE REVISION UPDATES 

From time to time, you may wish to update your device to the latest version of 

firmware or tune revision. For step by step instructions on how to update your SCT 

device visit 

www.sctflash.com/support

. Make sure you have returned your vehicle 

back to stock before updating your unit.

1.2 ABOUT YOUR SCT DEVICE 

AVAILABLE GASOLINE TUNES: 93, 91, and 87 octane.
AVAILABLE DIESEL TUNES: Performance, Street, Towing.

Note: Not all options are available for all vehicles.

• Livewire TS+ VIN locks (marries) to a single vehicle. You cannot use the device to tune a new 

or different vehicle until you have returned the original vehicle back to stock, which will unlock 

the device. You can only change vehicles 5 times before the unit is permanently locked. For 

additional troubleshooting and support, please see our knowledge base online at 

www.sctflash.com/support.

• Some pre-programmed tuning files are designed for vehicles with minor performance 

modifications such as; cold air kits, high-flow exhaust systems, and other basic modifications. 

Vehicles that have aftermarket superchargers or turbochargers will require custom tuning, which 

can be purchased only through SCT of one of our authorized SCT Custom Tuning Dealers. 

To locate a dealer near you use the dealer locator on the SCT website at 

www.sctflash.com/

where-to-buy

.

• The stock file is stored during initial programming. The stock file stays on the programmer until 

returned to stock. You should always return your vehicle back to stock before taking your vehicle 

in to any auto service facility or before updating your device.

NOTE: read your vehicle’s warranty carefully before installing or using this Product. You are 

solely responsible for determining whether use or installation of this Product will negate or 

diminish any applicable warranty coverage. Under no circumstances will the Seller be liable for 

the voidance of all or any part of the Buyer’s vehicle warranty. Rather, the Buyer assumes all 

risk and responsibility if an automotive manufacturer and/or dealer voids the Buyer’s vehicle 

warranty in whole or in part due to use or installation of this product. 

Summary of Contents for Ford 5015P





















Reviews: