background image

14

SECTION 4: USING DEVICE FEATURES

DIESEL & GAS SHARED OPTIONS:

AXLE RATIO:

 Set the axle ratio to correct shift patterns and speedometer.

TIRE SIZE: 

Set the tire size to correct shift patterns and speedometer.

IDLE SPEED: 

Sets Idle speed in RPM.

TRACTION CONTROL: 

On/Off setting disables traction control without using the TCS button.

WOT SHIFT: 

Increase or decrease the WOT Shift points of each gear individually by mph.

SHIFT PRESSURE:

 % change in transmission pressure during shifts. (+ = firmer) (- = softer)

GAS VEHICLES SPECIFIC OPTIONS:

TUNE TYPE:

 Preloaded tunes vary 

Performance levels by Octane. Premium fuel 

will provide the best performance increase.

TOWING TUNE:

 Adjusts the Octane 

based tunes to focus more on towing over 

performance.

ECONOMY TUNE:

 Adjusts the Octane 

based tunes to focus on economy over 

performance.

REAR O2’S:

 Disables the Rear O

2

s and 

eliminates CEL caused by rear O

2

 removal.

GLOBAL SPARK: 

Add or Remove Timing to 

the entire RPM range.

SPARK BY RPM:

 Add or Remove Timing by 

RPM Range. (0-2k), (2-4k,) (4-8k)

WOT FUEL:

 Add or Remove Fuel at Wide 

Open Throttle. (WOT)

FUEL INJECTORS:

 Allows you to adjust for 

different sized injectors. (Not available on 

all vehicles)

CMCV DELETES: 

Updates tune to handle 

the CMCV/IMRC delete plate’s modification.

FAN CONTROL:

 Lowers the temperature at 

which the fan turns on.

REV LIMITER DRIVE:

 Sets Rev Limit in RPM 

while in Drive

REV LIMITER NEUTRAL:

 Sets Rev Limit in 

RPM while in Neutral

SPEED LIMIT:

 Remove, Increase or 

Decrease the vehicle speed limiter. (Speed 

Governor).

3.4 USER ADJUSTABLE OPTIONS EXPLAINED

Summary of Contents for Ford 5015P





















Reviews: