17
17. Each List Test is composed of three commands given to the scanner.
If the test is successful, all these tests should say “OK” after the test
name. The application will ask you to repeat the List Test with 1) A
single tag, and 2) two tags in front of the antenna. The test is com-
plete when the application successfully detects two tags.
18. The Write Test requires a write - capable tag. Place the tag within 24
inches of the antenna.
19. Click on the Write Test button and observe the results in the Test
Results box. If the test passes, you will see:
“- Check Write –“
“Write: OK”
20. If the test fails, follow the instructions given by the application. If you
repeatedly get the “Move tag closer to antenna” instruction, ensure
the tag is directly over the antenna and there are no objects between
the antenna and tag.
21. For each antenna that is connected to the scanner, repeat steps 13-
20 for that antenna.
22. This completes the test of the scanner.
U519 Manual.p65
10/27/2000, 4:35 PM
17
