26
EN
DIP SWITCH 4
« ON » :
Active automatic closing in 30 seconds. Simultaneously pressing the two remotes top keys
(opened or
closed gate) will turn OFF the automatic mode (the blinker will flash 3 times as confirmation).
Repeat the operation to turn ON the automatic mode (the blinker will flash 3 times as confirmation).
Note : in case of automatic closing, photocells are required.
« OFF » :
Automatic closing OFF (caution it will still be possible to turn ON with the remote)
DIP SWITCH OVER C1
DIP SWITCH OVER C2
CURRENT (AMP)
DIP switch 2 OFF
Dip switch 3 OFF
4A
DIP switch 2 OFF
Dip switch 3 ON
3A
DIP switch 2 ON
Dip switch 3 OFF
2,5A
DIP switch 2 ON
Dip switch 3 ON
2A
Switch settings: «on» right position, «off» left position.
DIP SWITCH 1 D/S set :
ON = double gate operation
OFF = single gate operation (connection on 5 and 6)
Figure 1(4)
LED1
RF-Learn
RF1 Remote receive board
SYS-Learn
SW1:Set
1. D/S set
2. Over_C1
3. Over_C2
4. Auto
5. Ph
LED2
LED3
LED4
1 2
3
4
5
6
7
8 9 10
11 12 13 14
Transformateur
NONE
panneau
solaire
FI
Fusible T20A
250V
antenne
TX
sélecteur
à clé
bouton
poussoir
photocellules
RX
M1
M2
fil rouge /
marron
Fusible 2AL 250V
230V ~
fil bleu
OFF
ON
feu
clignotant
24V 10W
serrure
12/24V
D- SETTING/USING
D1- Single/double gate setting (dip switch 1)
D2- Power setting (dip switch 2 et 3)
D3- Gate auto-close adjustment (dip switch 4)
D4- Photocell adjustment (dip switch 5)
D5- Dephasing of the leaves (dip switch 6)
D6- Decelaration speed
DIP SWITCH 5 :
ON :
Photocells ON. When the photocells detect an obstacle while the gate is closing, the gate stops and opens
during 2 seconds.
If the gate auto-close is adjusted, and the photocells detect an obstacle when the gate is totally opened, then
the closing time will be reseted.
OFF :
Photocells OFF. No detection by the photocells.
The speed is 70% output of the full speed.
ELECTRONIC CARD
DIP SWITCH 6 :
ON :
Dephasing in closing / opening of 8 seconds.
OFF :
Dephasing in closing / opening of 3 seconds.
Summary of Contents for MBA0051
Page 2: ......
