3
6. 3x FIXING BRACKETS FOR FIXING THE SCREEN WINCH TO THE CEILING
7. 3x BRACKETS FOR FIXING THE SCREEN TO THE BEAM
8. 1x L-FORM BRACKET
9. 1x CONNECTOR BOX
10. 1x INSTALLATION MANUAL
This Screen Winch System is made to lift the screens models COMPACT – MAJOR –
ELLIPSE and E-LITE manufactured by Euroscreen SRL.
In order to mount this winch system and the projection screen, please read
carefully
the
following instructions:
1.
First of all fix to the ceiling the 3 brackets for the screen winch, taking care that these
3 brackets are perfectly aligned and also mounted horizontally. From the central
bracket, the left and right brackets have to be mounted at 98 cm distance from the
central bracket. (see Fig. 1). Each bracket has to be mounted to the ceiling like showed
in Fig. 2 with 4 suitable screws or bolts (
fixings are not supplied
).
2.
Fix the screen winch (seen from the front with the power cable at the right side of the
housing) at the brackets as shown in Fig. 3. First move the clamps close to the winch
housing and tighten the nuts inside the bracket as shown in Fig. 3.
Now in order to
secure the clamps, tighten the 2 front screws of the bracket like shown in Fig. 4.
SCREEN WINCH
SCREEN
Fig. 3
Fig. 2
