background image

10

SCREEN WINCH SYSTEM -CHECKREGISTER

In addition to manufacturer inspection guidelines, we recommendyou check your countries own legal obligations

for checking and testing of lifting equipment.

SCREEN WINCH SYSTEM PURCHASE DATE:

HALF-YEARLY CHECK

DATE

YEARLY CHECK

DATE

CHECKRESULT

(POSITIVE -NEGATIVE)

NOTES

HALF-YEARLYCHECK

Checkif rolling up and rolling down is working properly, without frictions or decelerations.
Checkthat if youcan hear the ticking noiseof the safety brake ispresent.
Checkwith the enduserthat projector lift andprojection screen(if this isthe configuration)

operate in different times(not at the sametime) .

YEARLYCHECK

Checksteel cables covered by blackPVC– nosteel wires have to be visible outside the black PVCscabbard.
Checkof the ceiling fixingbrackets of the screen winch system
Checkthat the end stopsare set properly, sothat in the rolled down position(screen winch systemcompletely open)
it remainsat least 3turnsofsteel wire onto the roller tube.
Checkthat boltsonthe bottom endsof the steel cables are tightly fixed.
Checkif rolling upand rolling downis workingproperly, without frictions or decelerations.
Checkthat if youcan hear the ticking noiseof the safety brake ispresent.
Checkwith the enduserthat projector lift andprojection screen(if this isthe configuration)

operate in different times(not at the sametime) .

Summary of Contents for SCREEN WINCH SYSTEM











Reviews: