5
SECTION 3. Site Preparation
Storage:
Lay any loose product flat (i.e. fillers, slope tops). Do not lean against a wall or stack unevenly.
Precheck:
Check all materials completely as soon as possible. Check items against the packing list and layouts
provided. If you are missing any items or have received damaged product please contact your dealer.
Site Inspection:
Before you begin installing your Duralife Lockers, a complete inspection of the job site should be
done. Inspect all areas in which you will be placing the lockers. Be sure to check for any variations in
the wall and floor surfaces. Do pay special attention to these areas while attaching the lockers.
Any variations in the walls that the lockers will be attaching to should be addressed prior to beginning
your installation. You may need to shim behind the lockers as to not “pull” the lockers to the wall,
twisting them out of shape.
After addressing the above listed items, make sure the area is clean and free of any debris. If you are
installing the lockers directly to the floor, be sure to sweep the area clean of debris before beginning.
Once the site inspection and any preparations are completed, you are ready to begin installing the
lockers.
Note:
If you have ordered the lockers with a base, you will be able to “float” the base over any low spots
in the floor.