Variable Damping System
Your stabilizer has two independently adjustable damping systems using PTFE
(AKA Teflon) to give ‘fluid like’ bounce damping. These can be adjusted to smooth
out a large range of spring bounce in your stabilizer.
The range of damping goes from zero to 100%. At 100% the small compression
spring is fully compressed and can’t be screwed in further. Loosening the damping
knob 5 full rotations will give you zero damping. Each clockwise rotation increases
the damping by 20%. There is a black line on the top and a red line on the bottom
of each damping knob so that you can count every 20% increase using the black
line and use the red line to count the odd settings i.e. 10%, 30%, 50%,70%, 90%.
To zero the damping first tighten the damping knobs to 100% each and then
loosen them 5 full rotations to get to 0% damping. This is always a good starting
point rather than using guesswork.
17
User Guide - AirFlo Duo - 4th Axis Stabilizer - 20181209 ScottyMakesStuff.com
