background image

 

GB-8 

MAINTENANCE 

 

Care and maintenance 

To clean the unit, unplug it and wipe off dust and stains with a soft cloth moistened with a mild 
soap and water solution only. Do not use benzene, thinner or similar chemicals to clean the unit. 

Cleaning CD disc 

If the music skips or does not play, the disc may need cleaning. Before playback, wipe the disc 
from the center out with a clean cloth. After use, store the disc in its case.  

 

If at any time in the future you should need to dispose of this product, please note that waste 
electrical products should not be disposed of with household waste. Please recycle where 
facilities exist. Check with your local authority or retailer for recycling advice (Waste Electrical 
and Electronic Equipment Directive). 
 

 

TROUBLESHOOTING GUIDE 

 

Problems Recommendations 

1. The player or display 

does not work properly 

1.1 Press the ON/STANDBY

 

 

button to go to standby mode and press it again 

to turn on the unit. 

1.2  Reset by unplugging the AC power cord for few seconds, then plug it back in. 

2. The disc does not play 

2.1 Place the disc with the label side facing up. 
2.2 Ensure that the disc is free from scratches and fingerprints. 
2.3 Check that the discs/ file formats are compatible; refer to “

TECHNICAL 

SPECIFICATIONS

”. 

2.4 Clean the disc. 

3. USB device is not read  

3.1 Check that the USB device file system is in FAT or FAT32 format. 
3.2 Due to different formats, some models of USB storage devices or MP3 players 

may not be read. 

4. Noise or distorted sound 

in radio mode. 

4.1 FM mode: extend and position the FM antenna to achieve the best reception.  
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for SX 50











Reviews: