background image

 

GB-9 

TECHNICAL SPECIFICATIONS 

 

CD/ USB 

Compatible discs and files                                 CD, CD-R/RW, CD-DA, MP3 and WMA   
USB port type

 

 

 

                     

2.0 

USB maximum handling capacity   

 

4GB

 

 

Radio  

Tuning range 

 

 

 

                     

FM:  87.5 – 108 MHz 

 

 

 

 

 

 

                     

 

Antenna 

    

 

 

 

 

 

               FM: telescopic antenna  

 

 

 

 

 

                     

 

Cassette

 

Recording system                                              AC bias 
Erasing system                                                 Magnetic erase  
Tape speed 

                                            4.75 cm / sec. 

 

General 

Output power (RMS) 

 

                      2 x 1.2 W (AC power) 

 

 

 

 

 

                      2 X 1 W (battery power supply) 

Power consumption  

 

                      12 W 

Speakers 

 

 

 

                      3” diameter, 8

 

Ohm impedance 

Power source  

 

 

                      AC 230V ~ 50Hz 

DC 9V: 6 x 1.5V batteries UM2/”C” size 

Dimension              

 

                      172 (H) x 262 (W) x 235 (D) mm 

Weight 

 

 

 

                      2 Kg 

 

Note: Due to continuing improvements, the technical specifications are subject to change 

without notice. 

 

Where to place the item :  
Today’s furniture is coated with a wide variety of lacquers and synthetic-coatings that are 
treated with an extensive range of cleaning products. Therefore, the possibility that some of 
these substances contain components that react adversely to the rubber feet of the item and 
soften them, cannot be completely excluded. The rubber feet of the appliance can cause 
discoloring to furniture surfaces. If necessary, place the appliance on a non-slide surface.  
 
 
 
 

 

Summary of Contents for SX 50











Reviews: