background image

 

GB-5 

RADIO OPERATION 

 

Listening to the radio

 

1.  When the unit is switched on, press the 

MODE 

button to select TUNER mode. 

2. Turn the 

TUNING 

dial to receive a station. The radio frequency is 

indicated on the LCD display.  

 

FM Stereo 

In FM mode, “ST.” is displayed when the unit receives a station with a strong signal and stereo 
sound.

  

 

Achieving optimum reception  

In FM mode, extend and position the FM antenna to achieve optimum reception. 

 

CD / MP3 / WMA OPERATION 

 

Start playback

 

1.  Open the CD compartment door.  
2.  Insert a disc with the label side facing up into the CD compartment. 
3.  Close the CD compartment door. 
4.  When the unit is switched on, press the 

MODE 

button to select “CD”. It will read the disc and 

after reading, the disc information will be displayed for a short moment. 
For 

CD

s, the total number of tracks will be displayed.              

For 

MP3/ WMA

 files, the total number of folders and tracks will be displayed. 

 

Then the unit will automatically start playback from the first track. 
During playback, the track number will be displayed. 

 

Pause playback  

Press the 

 

button to pause the playback, the track number and 

will flash. Press this button 

again to resume playback. 
 

Stop playback

 

Press the 

 

button to stop playback. Press the 

 

button to start playback from the first track.  

 

Search function

 

Skip to the next/ previous track 

1. Press the   button to skip to the next track. 
2. Press the   button once to skip to the beginning of the current track. Press it twice to skip 

to the previous track. 

 

Search within a track 

During playback, hold down the   or 

 button to go fast backwards or forwards and then 

release the button. Normal playback will resume from that point. 

 
Skip to the next folder (for MP3/ WMA files only)

 

Press the 

 button to skip to the next folder.  

 
 
 

Summary of Contents for SX 50











Reviews: