Scott DJX 480 PK, User Manual

Page: 42 / 45

Choosing an amplifier to connect to the DJX 480 PK
The speaker has a specific power rating, which you can find out by checking the label
at the back of the speaker. Refer to the Technical specifications section of this manual,
to check that your power amplifier has the correct power output for this speaker. Be
careful to consider the total impedance if you are connecting more than one speaker to
one side of a stereo power amplifier. Using a power amplifier with a power rating that
is too low can be dangerous since the output signal is often clipped in order to obtain
the desired level. If the power is too high, this will result in catastrophic failure: the use
of any amplifier with a power rating over the recommended power rating may damage
your speakers.
GB-5