Scott DJX 480 PK, User Manual

Page: 17 / 45

GB-3
FRONT PANEL CONTROLLER:
1. SHUTTLE (SHUTTLE DIAL)
Use this dial to select the scanning direction and speed. The disc is scanned forwards when the
shuttle dial is turned clockwise from the neutral position, and backwards direction when the shuttle
dial in turned counter clockwise. The scanning speed increases when the shuttle dial is turned
faster.
2. OPEN/CLOSE (OPEN/CLOSE BUTTON)
Press this button once to open or close the disc compartment. The main unit also includes
OPEN/CLOSE buttons. The disc compartment cannot be opened during playback, so please stop
playback before pressing the button.
3. TIME button
Press this button to switch the time display between the elapsed time and remaining time.
“REMAIN” appears on the LCD if you have selected the remaining time.
4. LCD
1. TRACK - Shows current track number
2. TIME BAR - Shows either time remaining or elapsed depending on the TIME button
setting. Starts flashing at the end of each track to alert the user to take action.
3. MINUTE - Shows “minutes” time information for the current track.
4. SECOND - Shows “seconds” time information for the current track.
5. FRAME - Shows “frame” time information of current track.
6. “SINGLE” - this appears when the unit is set to play just one track at a time. Otherwise the
CD will play continuously through all tracks. This function is controlled by the SGL button.
7. “TOTAL”, “REMAIN” - indicate whether the time shown on the display is the total
remaining time or the remaining time for the current track.
8. PITCH - Shows the percentage change in pitch (speed) of the song.
5. SGL (SINGLE BUTTON)
Press this button to select the single or continuous play mode. The “SINGLE” mode is indicated by
the SINGLE indicator on the LCD, whereas no indicator appears in continuous play mode.
6. PROG button
Press the PROG button to enter program mode and stop CD playback.
7. PROG INDICATOR
The PROG LED lights up when program mode is set.
8. LOOP INDICATOR
When the LOOP start point is set, the LED flashes. When in LOOP mode, the LED lights up.
9. LOOP (LOOP BUTTON)
Press the LOOP button to set the loop start point, and press the LOOP button again to set the
loop end point.
10. PITCH INDICATOR
When the indicator lights up, the pitch adjustment is enabled.
11. JOG (JOG DIAL)
If the dial is turned when a CD is paused, the point at which the sound is being produced moves
by a number of frames corresponding to the number of clicks. If you turn it clockwise this moves
the point forward, if you turn it counter clockwise this moves the point backwards.
12. BUTTON
Use this button to go back to the beginning of the current track or select a previous track.